Login to Windows 7. Automatic login of Windows user

13.09.2015 0 8186

If you are not particularly concerned about the security of your system, you can configure automatic loginwindows 7, which will slightly reduce the time it takes to start your computer.

1. Click the Start button and enter the following command in the search box:

2. In contribution Users, which should open first, uncheck the " Require username and password"

3. Click the "Apply" button at the bottom of the "user accounts".

4. When you see the auto login dialog box, enter the username you want to auto login with, and double-enter its password

5. Press the button OKto complete the system setup process.

Why disabling windows 7 login is not a good idea

No matter how much the process annoys you login windows 7, shutdownrequesting a username and password leads to serious threats associated with unauthorized access to your computer. If your Windows 7 computer is used exclusively at home, which is locked, has an alarm, guard dog and other security systems, then setting up auto-login on the computer will not greatly increase the risk of strangers gaining access to your computer.

However, if you are using a computer, laptop, tablet, or any other Windows 7 device that is often used outside of your home, we highly discourage remove Windows 7 login with a login and password request. Because anyone can access your device without your knowledge.

Login with username and password primarily protects your computer from users who should not have access to it. If your computer is stolen, and you set up auto-login on it, the thief will have access to everything you have worked with - email, social networks, bank accounts, etc.

How to set up auto login if your computer is on a domain

If your computer is on a domain, your credentials are stored on the server and not on your local computer. It complicates a little like remove Windows 7 loginusing a username and password, but this can still be configured.

  1. Open the Windows 7 registry (to do this, click the Search button and enter the command there regedit)
  2. Open the hive in the registry HKEY_LOCAL_MACHINE, Further SOFTWARE
  3. On the left, find the item Microsoft, Further Windows NT, CurrentVersion, Winlogon
  4. Select the key on the left WinLogon, and on the right find the value AutoAdminLogon
  5. Double click on AutoAdminLogon and change the value to 1
  6. Click OK
  7. Restart your computer and then use the standard instructions for setting up automatic login, described above.
  1. Open the Windows 7 registry (to do this, click the Search button and enter the regedit command there)
  2. Open the hive in the registry HKEY_LOCAL_MACHINE, Further SOFTWARE
  3. On the left, find the item Microsoft, Further Windows NT, CurrentVersion, Winlogon
  4. The following string parameters should be on the right (if not, create them): DefaultDomainName, DeftaultUserNameand DefaultPassword
  5. Enter values \u200b\u200bfor these parameters: domain, username and password, respectively
  6. Reboot your computer and make sure that auto-login is working for you.

P.S. If you failed disable automatic login to Windows, contact our

Good day, dear Internet users and Denis Trishkin again in touch.

There are many reasons why users want to set up automatic login. This may be a reduction in system boot time or just tired of constantly typing some characters. Experts advise to reset this type of protection against unauthorized access only when the equipment is used by one person and only him. So that the client does not need to constantly enter the code, it is necessary to follow a chain of steps:

That's all. During the next boot, you will no longer need to enter code characters - the desktop will boot itself.

Alternative ways( )

As in many other areas of Windows, this one provides other options, because suddenly for some reason you cannot perform the above steps.

Alternatively, you can simply remove this function:

It involves the creation of a special disk for resetting the code. How to make a suitable portable device? It's simple:

    We go to "".

    In the left column, click on "".


    to enlarge

    We connect the portable device to press "".

    Then a window will appear where, using the drop-down list, select the desired media. Then "".

    We are waiting for the system to create the corresponding device.

Now in the future, when the operating system asks to enter the security code at startup, enter any characters. An error message will appear, as well as the "" option that we need. We insert the already prepared portable device, where the code erasing algorithm is stored.

After that, a window will open with three fields, two and three of which will be a new protection and its confirmation, and the third will be a hint. We just leave them blank and that's it. Click on next. Now the old protection will be erased, but the new one is not installed.

Based on the search statistics, a large number of people are interested in the answer to this question. Although, to be honest, the business here is only for five minutes of work, no more. You will see everything for yourself soon. So we begin.

And now, when you turn on the computer and load the great and terrible Windows, we have a dialog box where you are asked to select the desired user and enter a password. This is how this picture looks clearly:

But we don't want that, now we will need to enter data every time. We love when there is an automatic login so that nothing is required of us. Okay, now let's do everything as it was, in the old way. It's very simple.

It is also worth saying that all the settings in the article will be made using an example operating system Windows 10. But if you set up this case on versions 7 or 8 of this OS, you will see that everything is absolutely identical.

So, first, click on the "Start" button and select "All Applications":

Then you need to find the "Command Line" in the general list of programs and run it:

In the black window that opens, enter the service command:

Then press the "Enter" key:

At this step, you need to uncheck the box "Require username and password", and then click on the "Apply" button:

Now a dialog box will open in which you will need to specify the user account on behalf of which the automatic login will be performed when starting Windows versions 7, 8, 10:

It is logical that this should be the "account" of the computer administrator. That is, a person who is endowed with maximum rights is the boss here. As you can see in the screenshot above, in the "User" column there is already the value "Admin" we need, so you just need to enter the password and confirm it.

Once again, I focus on this point, so that later there will be no confusion. "Admin" in our case is not the name of the account, but its type, which sets the rights. And the name of the recording itself can already be different, so to speak, in your opinion.

I hope that it will be more accessible this way, since it is very important to understand this very moment of the settings in order to really understand the whole essence of these actions. In general, for the final of all our joint gestures, click on "OK":

Well, folks, now let's check the correctness of the changes made. To do this, you need to restart your computer and see if the automatic login works.

So, the operating system starts to start, the nerves are stretched like strings:

And ... It seems that things have gone. Yes, we have coped with this task together with you:

So, dear readers, as you can see for yourself, we easily and simply set up automatic login to Windows 7, 8, 10. But if suddenly something did not work out for you, ask questions in the comments to the article.

At this point, allow me to take my leave. After all, as they say, it's time and honor to know. Thank you all for your attention and understanding. In the meantime, you can pause the music. And as always, the author is nostalgic. 😉

Today I will tell you about automatic login to windows 7 without entering a password. A very handy thing when you are tired of entering a password every time you turn on your computer, but at the same time you need to protect your computer from unauthorized access over the network.

This method is suitable for those who have no physical access to the computer, for example, your home computer. If you work in a large team and more than a dozen people may have access to your computer, then it is better not to enable automatic login. In general, as usual, we do everything wisely!

So let's consider two options, for computers that are not included in the domain and for those computers that are in the domain.

Automatic Windows 7 logon for computers outside the domain

Press the keyboard shortcut Win + R to open a window “ Execute”And enter the text in the field: control userpasswords2

Click “ OK“. The User Account Control window will open. Place the mouse cursor on the user under whose credentials you log in, uncheck the “ Require username ... ”

Click the “ Apply”And enter the current password of this user twice

Done! Now restart your computer and make sure you log in without entering a password.

Automatic logon to windows 7 for computers in a domain

This is not as easy as for computers outside the domain, but also not very difficult. Open the registry ( Win + R –> regedit) and go to the branch:

HKEY_LOCAL_MACHINE -\u003e SOFTWARE -\u003e Microsoft -\u003e Windows NT -\u003e CurrentVersion -\u003e Winlogon

Opening the parameter AutoAdminLogonand change the value from 0 to 1 (thereby enabling automatic entry).

Parameter DefaultUserName should contain the username with which to automatically log in (in my case User)

Now, to add a parameter containing the user's password (by default, there is none), right-click in the registry window and select “ Create a — String parameter", Enter the title DefaultPassword, and in the “Value” field enter the user's password.

The parameter “ DefaultDomainName”Enter your domain name.

Introduction

The user selection screen in Windows 7 can appear in several cases:

  • When logging in if automatic login is not configured
  • When the system is locked or the user is changed
  • When exiting sleep or hibernation, or exiting the screen saver

The third item on the list is detailed in the article After a period of inactivity, Windows 7 asks for a password to continue working. And in this article we will look at setting up automatic login without selecting a user and entering a password.

About automatic login

Automatic login without entering a password is convenient if you are the only user of the computer, or use a specific account much more often than others. When setting up automatic logon, you need to understand that anyone who turns on the computer will easily log in to the system and have access to all files and settings for the account used. Setting up automatic logon differs depending on whether the computer is joined to a domain.

The necessary conditions

If the system has only one active account without a password, it automatically logs in, so no additional configuration is required. If you have multiple accounts, automatic login requires configuration, even if none of them has a password. Additional "service" accounts can be added to the system when installing various software.

Administrator rights are required to set up automatic login. The configuration process is almost the same as in Windows XP or Windows Vista.

Computers outside the domain

For computers that are not part of the domain (for example, home computers), you can configure automatic logon in the graphical interface of the operating system.

Configuring automatic login is complete.

Automatic logon can also be configured in the system registry. All required parameters are listed in the table in the next section of the article.

Computers in the domain

For computers that are members of a domain, you must specify the name of the default domain to which automatic logon will be performed. In the graphical interface of the operating system, this is not possible, so the automatic login is configured in the system registry.

The first three parameters in the table can be used to configure automatic logon on non-domain computers.

Note for Windows 8.x / 10... When using a Microsoft account, the DefaultUserName parameter value specifies the username in the form "MicrosoftAccount \\ [email protected]", without quotes.

User selection for automatic login

If you have automatic login enabled, but you need to log in under a different account, press and hold Shiftwhen Windows starts. Or press Log out/Change user in the shutdown menu and hold down Shift.

The change of users during automatic login can also be affected by the string parameter (REG_SZ) ForceAutoLogon in the registry key:

HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows NT \\ CurrentVersion \\ Winlogon

The parameter can take values 1 (included) and 0 (switched off). Its purpose is to ensure that the user is always present on the system if automatic login is configured and the computer is turned on. In fact, enabling this parameter prevents the user from logging out - after the session ends, the login is immediately performed automatically. This behavior is intended for computers running in kiosk mode in a public place (such as a library). You can bypass it only by holding the key Shift at the end of the session.

Loading ...Loading ...